Garelick 99181 TRANSOM MOUNTING EXTENSION SHIM User Manual download pdf

Installation Instructions for

Sport/Diver Ladder Transom Mounting Extension Shims 99181/99184

Form 12.330

Thank you for selecting our superior quality Garelick EEz-In

Brand Boarding Ladder. Your ladder was designed and

manufactured using the finest material available to provide long

product life, all fabricated and finished with boating in mind.

Choosing the proper size ladder for location and correct fit is

important to assure safe, convenient and reliable use.

ASSEMBLY INFORMATION

Read these instructions completely before starting assembly.

REQUIRED HARDWARE

NOTE: The following parts are not included due to the variety of

possible installations.

4 suitable length 5/16"-18 stainless steel bolts

(NOTE: Bolts should be at least 1-1/4" longer than transom

and backing plate thickness.)

4 suitable stainless steel backing washers

4 5/16"-18 stainless steel lock nuts

Marine adhesive/sealant and anti-seize compound

Backing plate (minimum size 4"x8" of suitable material)

TRANSOM OR EXTENSION BRACKET MOUNTING

1. Choose the most suitable side of transom for mounting

ladder.

2. Locate a place on the transom where the ladder will mount

and not interfere with the turning and lowering operation

of your motor. Determine the actual waterline when the

boat is at rest. Mark this location in both the horizontal and

vertical direction.

3. Locate the ladder on this mark and slide it up to the desired

mounting height, keep in mind that it is optimal to have at

least two steps in the water for ease of boarding. Mark the

ladder’s position at the top mounting bolt.

NOTE: This line will locate the top two holes for the

mounting plate.

4. Check the inside of the transom where the mounting is

proposed. Verify that there is ample space to install

a backing plate (minimum size 4"x8") that will support that

ladder installation. A 4"x8" minimum flat area or the size

of the backing plate is required for a secure installation.

NOTE: The backing plate should be made of aluminum,

marine plywood, or some other suitable non-

compressive material.

5. Mark four mounting plate hole locations on your transom

using the extension bracket as your template. Drill four

11/32" or 3/8" holes perpendicular to transom.

6. Put a bead of adhesive caulk around perimeter of holes,

coat the bolt threads with anti-seize compound and secure

the mounting bracket in place by tightening all four bolts.

7. Finish installing substrate, lock and faceplate as illustrated

in ladder mounting instructions.

99181

99184

Write for

a Complete

Catalog

Phone: 651-459-9795

PO Box 8, 644 2nd Street E-mail: [email protected]

St. Paul Park, Minnesota 55071 On the Web: www.garelick.com

12/97

Form 12.330 1

Summary of Contents

Page 1 - Form 12.330

Installation Instructions forSport/Diver Ladder Transom Mounting Extension Shims 99181/99184Form 12.330Thank you for selecting our superior quality Ga

Comments to this Manuals

No comments

Garelick 99181 TRANSOM MOUNTING EXTENSION SHIM User Manual

Browse online or download User Manual for Accessories for water Garelick 99181 TRANSOM MOUNTING EXTENSION SHIM. Garelick 99181 TRANSOM MOUNTING EXTENSION SHIM User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Accessories for water Garelick 99181 TRANSOM MOUNTING EXTENSION SHIM