Garelick 71036 MOTOR TILTER User Manual download pdf

Operating Instructions for

Model 71036 Motor Tilter

Form 12.151

Insert end hook (A) into hand recess at the rear of the motor as shown in Fig. 1.

Position rubber legs (B) on the motor shroud as close to the opposite end where firm

pressure can be absorbed (see fig. 1).

NOTE: If an adjustment is necessary to fit your motor, remove screw from casting (C)

as illustrated in fig. 2 and then slide casting (C) back on tube to the position as

described above. Redrill screw hole with a 1/8" bit. Reinsert and secure screw in

position. Cut off excess tube with a hacksaw.

IMPORTANT: BE SURE MOTOR IS FREE TO TILT BEFORE PULLING BACK. USE A

SMOOTH, STEADY PULL.

FIG. 1

FIG. 2

Write for

a Complete

Catalog

Phone: 651-459-9795

PO Box 8, 644 2nd Street E-mail: [email protected]

St. Paul Park, Minnesota 55071 On the Web: www.garelick.com

12/97

Model 71036 Motor Tilter 1

Summary of Contents

Page 1 - Model 71036 Motor Tilter

Operating Instructions forModel 71036 Motor TilterForm 12.151Insert end hook (A) into hand recess at the rear of the motor as shown in Fig. 1.Position

Comments to this Manuals

No comments

Garelick 71036 MOTOR TILTER User Manual

Browse online or download User Manual for Accessories for water Garelick 71036 MOTOR TILTER. Garelick 71036 MOTOR TILTER User Manual

Summary of Contents

Comments to this Manuals